Welcome to visitTaixing HaoHua FL-Plastics Co., LTD

NEW Worry-free purchase experience
Free consultation hotline 13852676777
LOCATION:Home > NEW > Industry News
Polypropylene flange protection cover is better than PP plastic flange protection cover
Release Time:2018-11-20 Hit:33

The production of PP plastic flange protection cover requires mold to be injection molded or cast, which has high production cost and low dimensional adaptability, and the material of the existing PP plastic is not gas permeable, which causes the pipe and the flange piece to be easily thermally expanded, thereby causing the pipe flange cover. Fall off.

The polypropylene flange protection cover has the advantages that the lower end and the bottom surface are made of polypropylene non-woven fabric or composite leather, the upper end is made of soft material and surrounds to form an open end; and the side wall is provided with a diameter for adjusting the opening end. Adjustment parts. The bottom surface of the flange protection cover and the lower end of the side wall are made of polypropylene non-woven fabric or composite leather. It has the advantages of breathable, environmental protection, wear resistance, oil proof, waterproof, anti-solar radiation aging, small specific gravity, etc., which effectively reduces the pipeline. The internal temperature and the transportation cost are greatly reduced. By adjusting the diameter of the open end, it can be applied to tubes of various diameters, which reduces the production cost.

PTFE Open Mesh…
PTFE Coated Fi…
PTFE Film Adhe…
Silicone Coate…
PTFE Fusing Ma…
Industry News
Company News
Company:Taixing HaoHua FL-Plastics Co., LTD
TEL:13852676777 | 0523-89770993
ADD:Huangqiao Industrial Park ,Taixing, Jiangsu, China
Sweep the phone

All rights reserved © 2018 Taixing HaoHua FL-Plastics Co., LTD    苏@@ICP备@@14052369号-1

Technical Support:JCWL